How Do You Clean a Vacuum Cleaner for Maintenance Between Professional Carpet Cleanings in Buena Park, CA?
February 18, 2022The Big No Nos of Carpet Cleaning in Laguna Niguel, CA; Using Hot Water, Letting Spills Sit & More
March 4, 2022Do Vacuums Need Maintenance in Dana Point, CA? How Do I Clean My Vacuum Cleaner?
Everyone should do everything they can to keep the carpets well cared for after investing in high-quality carpets. Immediately cleaning up spills, and daily vacuuming are the basics, annual carpet cleaning services. As a high-quality vacuum featuring a HEPA filter are extra options that keep your carpets looking good and healthy, treating the carpets with products that help resist staining other harmful things as well. Maintaining the vacuum is a necessary step to your carpet care, however. The standard steps to clean your bagless vacuum is what we at My Steam Green Carpet Cleaning Orange County would like to share today.
What is the Proper Care & Maintenance of Vacuum Cleaner?
Adequate airflow is important when it comes to the efficiency of your bagless vacuum. You can keep the vacuuming doing its job with routine clean the filter and canister promotes ideal airflow. When it should be emptied is when the canister reaches the halfway mark. Beyond the emptying of the canister, the vacuum should be cleaned ever 4-6 weeks. Before cleaning the vacuum, always review the vacuums’ manual to specific instructions. What You are Going to Need:
– Sink of warm soapy water
– Scrubbing brush
– Scissors
– Microfiber cloths
How Do I Clean My Vacuum Cleaner?
1) Before getting started and remove the canister first, ensure the vacuum is unplugged.
2) Use a dry microfiber cloth wipe the inside after you empty the canister and to remove any residual dust.
3) Submerge it in a sink of warm soapy water before washing the canister. Rinse the suds clean and let it sit out overnight to fully dry. Prior to reassembling the vacuum, always make sure the canister.
4) Either cleaned or replaced, the filter needs attention. Be sure to read your manual to know if your vacuum’s filter is washable or if it needs to be replaced.
5) Before you wash the washable filter, go outside or in the trash can, knock all the excess dust first against a hard surface.
6) Rinse the filter thoroughly under the tap of warm water until the water runs clear. Never use any soap or cleaners unless otherwise directed in the manufacturer’s manual.
7) Once it is completely dry, you can replace it in the vacuum, but usually, the filters require time, such as leaving it out all night.
8) By removing the base plate, access the beater bar. Use the scissors to cut loose the threads, strings, and hair wrapped around the beater bar and then brush off the debris while taking care to avoid damage the beater bar.
9) Wipe down the beater bar with a microfiber cloth to clean off the residues once the wound-up stringy stuff has been cleared off from the bar.
10) Wipe the base plate with microfiber cloth, reattach the beater base and the base plate. Then wipe the exterior of the vacuum well after the vacuum is dry and reassembled.
Carpet Cleaning & More in Huntington Beach, Laguna Woods, Santa Ana, Newport Beach, Laguna Beach, Aliso Viejo, Costa Mesa, Fountain Valley, Irvine, Lake Forest & Orange County, California
To ensure the carpets are efficiently cleaned and refreshed, trust My Steam Green Carpet Cleaning Orange County when it comes to professional carpet cleaning services. To clean your carpets, our professionals use advanced equipment and premium products. Call us today!